Product ID:370-01 WHITE BASE, PACON SUPREME EXTERIOR (SUPDAT)
MSDS Date:06/01/1992
FSC:8010
NIIN:00N063406
MSDS Number: BYWWZ

BRUNING PAINT CO

601 S HAVEN ST
BALTIMORE, MD 21224
US

Emergency Phone: 410-342-3636

Info Phone: 410-342-3641

Cage: EO376

KYANIZE PAINT

BALTIMORE, MD 21224 US

Telephone: 800-368-2076

Cage: 85520

1.61-1.92.

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <1.92%

OSHA PEL N/K

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

0.83-1.03.

RTECS: 9999999VO

PROTECTION MAY ALSO BE NECESSARY IN FORM OF VAPOR

RTECS: 9999999ZZ

GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO KEEP

RTECS: 9999999ZZ

LIMIT & TO REMOVE DECOMPOSITION PRODUCTS DURING

RTECS: 9999999ZZ

RUBBER, NEOPRENE, BUNA N OR NITRILE.

RTECS: 9999999ZZ

PROPERLY LAUNDERED.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOC RPTD & PRLNG OCCUP
OVEREXP TO SOLVS W/PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY
DELIB CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL OR FATAL. DO
NOT BREATHE VAPORS OR SPRA Y MIST. WEAR AN APPROP, PROPERLY FITTED
NIOSH/MSHA APPRVD RESP DURING & AFTER APPLICATION UNLESS AIR (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MONITORING DEMONSTRATES VAP/MIST
LEVELS ARE BELOW APPLIC LIMS. FOLLOW RESP MFR'S DIRECTIONS FOR RESP
USE. BASED ON PRESENCE OF ETHYLENE GLYCOL, THESE PRODS CAN BE IRRIT
TO EYES. THESE PRODS C ONTAIN PIGMENTS WHICH MAY BECOME DUST
NUISANCE WHEN REMOVED BY ABRASIVE BLASTING, SANDING/GRINDING. THESE
PRODS (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH W/LUKE WARM WATER FOR AT LST 15 MINS. SEEK MD
IMMED. SKIN:FLUSH WASH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE
CONTAM CLTHG PROMPTLY. IF IRRIT OCCURS, GET MED ATTN. INHAL:REMOVE
EXPOS INDIVI DUAL TO FRESH AIR. RESTORE BRTHG IF REQD. CONT MD
IMMED. INGEST:RINSE MOUTH IMMED. GIVE EXPOS INDIVIDUAL 6-8 OZS OF
LIQ. NEVER GIVE ANYTHING BY MOUTH TO UNCON PERS. DO NOT INDUCE
VOMIT UNLESS (SUPDAT)

Flash Point Method:TCC
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTAINERS EXPOSED TO INTENSE HEAT FROM
FIRES SHOULD BE COOLED W/WATER TO PREVENT VAPOR PRESSURE BUILDUP
WHICH COULD RESULT IN CONTAINER RUPTURE.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID CONTACT W/EYES. KEEP FROM
FREEZING. DO NOT STORE >120F. DO NOT TAKE INTERNALLY. CLOSE
CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN!
Other Precautions:AVOID PROLONGED OR REPEATED BREATHING OF VAPORS.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, USE NIOSH/MSHA APPRVD
MECH FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY
DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS, USE NIOSH/MSHA
APPRVD CHEM-MECH FILTER S DESIGNED TO REMOVE COMBINATION(SUPDAT)
Ventilation:USE VENT AS REQD TO CONTROL VAP CONCS. IF EXPOS EXCEEDS
TLV, USE NIOSH/MSHA APPRVD RESP TO PVNT OVEREXP. PROVIDE (ING 4)
Protective Gloves:RESISTANT GLOVES SUCH AS NATURAL (ING 6)
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . AN APRON SHOULD BE WORN TO AVOID SKIN
CONTACT.
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR IT UNTIL IT HAS
BEEN (ING 7)
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:ACRYLIC FLAT HOUSE PAINT. % VOLAT:63.95-69.06.
EFTS OF OVEREXP:CONTAIN ONE/MORE REPORTED TERATOGENS/SUSPECTED
TERATOGENS. FIRST AID PROC:ADVISED BY MD. CONT MD IMMED. RESP PRO
T:OF PARTICULATE & GAS & VAP. IN CONFINED AREAS, USE NIOSH/MSHA
APPRVD AIR LINE TYPE RESPS/HOODS. RESP (ING 3)

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.25-1.38
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
THESE PRODUCTS ARE INCOMPATIBLE W/STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE & OXIDES
OF NITROGEN.

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED OR WATERWAY.
DISPOSE OF THESE PRODUCTS I/A/W APPLICABLE LOCAL, COUNTY, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.